一、Manual Application – Layout/手動系統-布局圖
二、Gluing Gun/膠槍
1.Inlet valve / 入膠閥
6 mm needle
metal-to-metal sealing system
very easy to maintain, replacement less than 5 min
針直徑6mm
金屬密封系統
易于維護,更換備件時間小于5分鐘
2.Dosing Chamber / 定量機膠室
20 / 60 / 100 / 200 / 300ccm ,(usable volume)
Special seal carrier for easy seal replacement
可用容積20/ 60/ 100/ 200/ 300cm3
密封好,易更換
3.Outlet Valve / 出膠閥
3mm / 6 mm needle
Pressure sensor
Integrated heating
Metal-to-metal sealing system
Hard metal nozzle
Very easy to maintain, replacement less than 5 min
針直徑3mm/6mm
壓力傳感器
加熱集成到出膠閥
金屬密封
膠嘴的強度高
易維護,更換備件時間小于5分鐘
三、Pump/泵體
1.Components of Material Supply / 供膠系統的組成
2.Single and Double Barrel Pump / 單泵和雙泵
Advantage of DBP over SBP / 雙泵的優勢
When one barrel is empty, other barrel is active and systems works without any interruption
When one barrel is working,other barrel can be replaced without any interruption
當一個膠桶用完時,另一個膠桶可以自動開始工作,而不需要中斷生產。
當一個膠泵在工作時,另一個膠泵可以更換新的膠桶,不需要中斷生產。
3.Pump system / 泵系統
Simple and strong construction
Only one cable from control cabinet to pump stand (cable track)
One stand for all barrel sizes 50 L / 200 L
Position sensor for accurate fill level display
Rotatable with one pivot point,easily for maintenance
結構簡單,美觀,剛性好
從電控柜到泵站只有一根電纜
一個泵站兼容多種容量的膠桶
膠量的監測依靠位置傳感器的反饋
可旋轉的泵體,圍繞著一個固定點,便于維修
四、Application cases/應用案例
Global BMW all-new 3 series production line all use NIMAK adhesive bonding system
全球寶馬全新3系生產線都在使用NIMAK涂膠系統
Porsche plant is widely use NIMAK adhesive bonding system in their new project of Cayanne:50systems
保時捷在新卡宴項目中使用NIMAK涂膠設備:50systems
Netherlands truck manufacturer DAF plant is using NIMAK adhesive bonding system in their new project: 15 systems
荷蘭卡車制造商 DAF 工廠 項目中使用NIMAK涂膠設備:15 systems